Stardream Metallic Card Stock from CutCardStock is what I'm using for this project
A bridge fold card can be made in just about any size you want. Mine was made using an 11 x 7 inch piece of STARDREAM METALLIC SPARKLY BRIGHT WHITE PLUTO 8.5 X 11 CARD STOCK as the base. I scored at 1 3/8 and 2 3/4 inches on both sides of the 11 inch side. This makes the center of the card measure about 5 1/2 inches. The 2 ends are folded as seen below.
I cut a piece of STARDREAM METALLIC SAPPHIRE (BLUE) 105LB 8.5 X 11 CARD STOCK to 5 1/4 x 6 3/4 inches. A piece of STARDREAM METALLIC SPARKLY BRIGHT WHITE PLUTO 8.5 X 11 CARD STOCK was cut to 5 1/8 x 6 5/8 inches. These pieces are used for the center panel background.
Using STARDREAM METALLIC SILVER 105 LB CARD STOCK I die cut a reindeer and tree. I backed the tree with a piece of sapphire card and fussy cut around.
The pluto card cut for the center background was embossed with a 3-D embossing folder, layered onto the sapphire matte and adhered to the base.
To finish I hand cut the bridge piece with a wavy edge across the top and adhered to the side pieces along the bottom.
I die cut 2 snowflakes and a “Happy Birthday” sentiment. These die cuts were added to the card.
The reindeer die cut was added last.
I hope you like my bridge fold card project. Of course it can be adapted for any occasion or theme by changing colors and/or dies. The possibilities are endless!
As always, be sure and check out the CutCardStock Facebook page for more inspiration.
I'm linking up to: